Hand press, button dies moulds, die punch tools and pliers
Products in the Hand press, button dies moulds, die punch tools and pliers category
Availability: In Stock
Product code: SK_930219
The metal grommet is non-rusting. It is used to bump grommets piston and press, which can be found under the code 070241 or 790770. We recommend using it on fabric a set of die-cuts . Grommets are suitable for curtains, curtains, bags, etc. The grommets are in 2nd quality, because the color peels of..
1.79€
1.50€
Availability: In Stock
Product code: SK_930219
The metal grommet is non-rusting. It is used to bump grommets piston and press, which can be found under the code 070241 or 790770. We recommend using it on fabric a set of die-cuts . Grommets are suitable for curtains, curtains, bags, etc. The grommets are in 2nd quality, because the color peels of..
8.97€
7.48€
Availability: In Stock
Product code: SK_930219
The metal grommet is non-rusting. It is used to bump grommets piston and press, which can be found under the code 070241 or 790770. We recommend using it on fabric a set of die-cuts . Grommets are suitable for curtains, curtains, bags, etc. The grommets are in 2nd quality, because the color peels of..
8.97€
7.48€
Availability: In Stock
Product code: SK_090858
This press is not making holes. To the press you must also buy the correct mold 090859 and self-cover buttons 730363, 740076, 090861 or select here another size Press should be bolted to a solid surface. To press pull handle towards you. Procedure: 1 Cut a square or circle of suitable fabric a l..
55.70€
46.41€
Availability: In Stock
Product code: SK_090858
This press is not making holes. To the press you must also buy the correct mold 090859 and self-cover buttons 730363, 740076, 090861 or select here another size Press should be bolted to a solid surface. To press pull handle towards you. Procedure: 1 Cut a square or circle of suitable fabric a l..
111.39€
92.83€
Availability: In Stock
Product code: SK_890523
The dies mold is an integral part of the press. Suitable to rivet hollow rivets Ø12 mm . Mold consists of two parts. Place the larger part to the lower part of the press. We screw the second part into the press and insert a suitable component for riveting. Your handbags, shoes and clothes will turn ..
12.72€
10.60€
Availability: In Stock
Product code: SK_890523
The dies mold is an integral part of the press. Suitable to rivet hollow rivets Ø12 mm . Mold consists of two parts. Place the larger part to the lower part of the press. We screw the second part into the press and insert a suitable component for riveting. Your handbags, shoes and clothes will turn ..
25.45€
21.21€
Availability: In Stock
Product code: SK_900109
The dies mold is an integral part of the press. We rivet with its help double-sided hollow rivets Ø10 mm . The dies mold consists of two parts. Place the larger part, into which the rivet is inserted, in the lower part of the press. We screw the second part into the press and insert a suitable compo..
13.33€
11.11€
Availability: In Stock
Product code: SK_900109
The dies mold is an integral part of the press. We rivet with its help double-sided hollow rivets Ø10 mm . The dies mold consists of two parts. Place the larger part, into which the rivet is inserted, in the lower part of the press. We screw the second part into the press and insert a suitable compo..
26.66€
22.22€
Availability: In Stock
Product code: SK_890738
The dies mould is an integral part of the press. With its help, you can rivet double-sided hollow rivets Ø5 mm . The piston consists of two parts. Place the larger part of the piston into which the rivet is inserted in the lower part of the press. We screw the second part into the press and insert a..
13.11€
10.93€
Availability: In Stock
Product code: SK_890738
The dies mould is an integral part of the press. With its help, you can rivet double-sided hollow rivets Ø5 mm . The piston consists of two parts. Place the larger part of the piston into which the rivet is inserted in the lower part of the press. We screw the second part into the press and insert a..
26.22€
21.85€
Availability: In Stock
Product code: SK_930191
With the dies mold you can rivet hollow rivets Ø6 mm . The dies mold consists of two parts. Place the larger part of the dies mold into which the rivet is inserted in the lower part of the press. We screw the second part into the press and insert a suitable component for riveting. Your handbags, s..
12.93€
10.78€
Availability: In Stock
Product code: SK_930191
With the dies mold you can rivet hollow rivets Ø6 mm . The dies mold consists of two parts. Place the larger part of the dies mold into which the rivet is inserted in the lower part of the press. We screw the second part into the press and insert a suitable component for riveting. Your handbags, s..
25.86€
21.55€
Availability: In Stock
Product code: SK_880626
The dies mould is an integral part of the press. Used to rivet hollow rivets Ø8 mm . The dies mould consists of two parts. Place the larger part of the mould into which the rivet is inserted in the lower part of the press. We screw the second part into the press and insert a suitable component for ..
14.05€
11.71€
Availability: In Stock
Product code: SK_880626
The dies mould is an integral part of the press. Used to rivet hollow rivets Ø8 mm . The dies mould consists of two parts. Place the larger part of the mould into which the rivet is inserted in the lower part of the press. We screw the second part into the press and insert a suitable component for ..
28.10€
23.41€
Availability: In Stock
Product code: SK_930028
The dies mold consists of four parts. It is used to rivet double-sided prints, which you can find under the code 930039. The pistons on the press change according to which part of the print you want to attach. The diameter of the lower part, which is inserted into the press, is 18.9 mm...
16.45€
13.71€
Availability: In Stock
Product code: SK_930028
The dies mold consists of four parts. It is used to rivet double-sided prints, which you can find under the code 930039. The pistons on the press change according to which part of the print you want to attach. The diameter of the lower part, which is inserted into the press, is 18.9 mm...
49.35€
41.12€
Availability: In Stock
Product code: SK_890164
The metal dies mould is intended for riveting grommet with thinestones Ø10 mm . It consists of two parts. It is used in such a way that the larger part of the mould is placed in the lower part of the press and the material with the grommet is inserted. The other part is screwed into the upper part o..
14.72€
12.27€
Availability: In Stock
Product code: SK_890164
The metal dies mould is intended for riveting grommet with thinestones Ø10 mm . It consists of two parts. It is used in such a way that the larger part of the mould is placed in the lower part of the press and the material with the grommet is inserted. The other part is screwed into the upper part o..
29.45€
24.54€
Availability: In Stock
Product code: SK_740541
Eyelet Die Mould suitable riveting of 080646, 080647, 080648. Consists of two parts. It is used so that the greater part of the piston is placed at the bottom of the press. Screw-thread diameter is 7.6 mm. The diameter of the bottom that is inserted in the press is 18.9 mm.
Dies Mold #3 (22") is..
32.46€
27.05€
Availability: In Stock
Product code: SK_740541
Eyelet Die Mould suitable riveting of 080646, 080647, 080648. Consists of two parts. It is used so that the greater part of the piston is placed at the bottom of the press. Screw-thread diameter is 7.6 mm. The diameter of the bottom that is inserted in the press is 18.9 mm.
Dies Mold #3 (22") is..
32.46€
27.05€
Availability: In Stock
Product code: SK_740541
Eyelet Die Mould suitable riveting of 080646, 080647, 080648. Consists of two parts. It is used so that the greater part of the piston is placed at the bottom of the press. Screw-thread diameter is 7.6 mm. The diameter of the bottom that is inserted in the press is 18.9 mm.
Dies Mold #3 (22") is..
64.92€
54.10€
Availability: In Stock
Product code: SK_740541
Eyelet Die Mould suitable riveting of 080646, 080647, 080648. Consists of two parts. It is used so that the greater part of the piston is placed at the bottom of the press. Screw-thread diameter is 7.6 mm. The diameter of the bottom that is inserted in the press is 18.9 mm.
Dies Mold #3 (22") is..
64.92€
54.10€
Availability: In Stock
Product code: SK_730319
Eyelet Die Mould is intended for riveting and consists of two parts. It is used so that the greater part of the piston is placed at the bottom of the press and put fabric with grommet Ø10 mm. Second part is screwed into the top of the press. Diameter of screw part is 7.7 mm, diameter of bottom part..
20.63€
17.19€
Availability: In Stock
Product code: SK_730319
Eyelet Die Mould is intended for riveting and consists of two parts. It is used so that the greater part of the piston is placed at the bottom of the press and put fabric with grommet Ø10 mm. Second part is screwed into the top of the press. Diameter of screw part is 7.7 mm, diameter of bottom part..
41.26€
34.39€
Availability: In Stock
Product code: SK_740926
Eyelet Die Mould is intended for riveting and consists of two parts. It is used so that the greater part of the piston is placed at the bottom of the press and put fabric with grommet 14 mm in diameter, second part is screwed into the top of the press. Screw-thread diameter is 7.7 mm. The diameter ..
22.33€
18.61€
Availability: In Stock
Product code: SK_740926
Eyelet Die Mould is intended for riveting and consists of two parts. It is used so that the greater part of the piston is placed at the bottom of the press and put fabric with grommet 14 mm in diameter, second part is screwed into the top of the press. Screw-thread diameter is 7.7 mm. The diameter ..
44.66€
37.21€
Availability: In Stock
Product code: SK_740925
Eyelet Die Mould is intended for riveting and consists of two parts. It is used so that the greater part of the piston is placed at the bottom of the press and put fabric with grommet 22 mm in diameter, which can be found under code 060914, second part is screwed into the top of the press. Screw-th..
31.48€
26.23€
Availability: In Stock
Product code: SK_740925
Eyelet Die Mould is intended for riveting and consists of two parts. It is used so that the greater part of the piston is placed at the bottom of the press and put fabric with grommet 22 mm in diameter, which can be found under code 060914, second part is screwed into the top of the press. Screw-th..
62.96€
52.46€
Availability: In Stock
Product code: SK_060990
Eyelet Die Mould is intended for riveting and consists of two parts. It is used so that the greater part of the mould is placed at the bottom of the hand press and put fabric with eyelet Ø6 mm, that you will find under code 060915 or 890690. Second part is screwed into the top of the press. Screw-t..
18.34€
15.28€
Availability: In Stock
Product code: SK_060990
Eyelet Die Mould is intended for riveting and consists of two parts. It is used so that the greater part of the mould is placed at the bottom of the hand press and put fabric with eyelet Ø6 mm, that you will find under code 060915 or 890690. Second part is screwed into the top of the press. Screw-t..
36.68€
30.57€
Availability: In Stock
Product code: SK_890168
The metal dies mould is intended for riveting grommet Ø10 mm with rhinestones , consists of two parts. It is used by placing the larger part of the mould in the lower part of the press and inserting the fabric with the grommet. We screw the second part into the upper part of the press. The diameter..
14.72€
12.27€
Availability: In Stock
Product code: SK_890168
The metal dies mould is intended for riveting grommet Ø10 mm with rhinestones , consists of two parts. It is used by placing the larger part of the mould in the lower part of the press and inserting the fabric with the grommet. We screw the second part into the upper part of the press. The diameter..
29.45€
24.54€
Availability: In Stock
Product code: SK_790414
Die Mold is used to punch holes for grommets. It consists of two parts. To do this, place the larger part of the die mold at the bottom of the press and load the fabric. Screw the second part into the upper part of the press. The diameter of the lower part to be inserted into the press is 18.9 mm...
17.90€
14.92€
Availability: In Stock
Product code: SK_790414
Die Mold is used to punch holes for grommets. It consists of two parts. To do this, place the larger part of the die mold at the bottom of the press and load the fabric. Screw the second part into the upper part of the press. The diameter of the lower part to be inserted into the press is 18.9 mm...
17.90€
14.92€
Availability: In Stock
Product code: SK_790414
Die Mold is used to punch holes for grommets. It consists of two parts. To do this, place the larger part of the die mold at the bottom of the press and load the fabric. Screw the second part into the upper part of the press. The diameter of the lower part to be inserted into the press is 18.9 mm...
17.90€
14.92€
Availability: In Stock
Product code: SK_790414
Die Mold is used to punch holes for grommets. It consists of two parts. To do this, place the larger part of the die mold at the bottom of the press and load the fabric. Screw the second part into the upper part of the press. The diameter of the lower part to be inserted into the press is 18.9 mm...
53.70€
44.75€
Availability: In Stock
Product code: SK_790414
Die Mold is used to punch holes for grommets. It consists of two parts. To do this, place the larger part of the die mold at the bottom of the press and load the fabric. Screw the second part into the upper part of the press. The diameter of the lower part to be inserted into the press is 18.9 mm...
53.70€
44.75€
Availability: In Stock
Product code: SK_790413
Die Mold is used to punch holes for grommets. It consists of two parts. To do this, place the larger part of the die mold at the bottom of the press and load the fabric. Screw the second part into the upper part of the press. The diameter of the lower part to be inserted into the press is 18.9 mm...
11.12€
9.27€
Availability: In Stock
Product code: SK_790413
Die Mold is used to punch holes for grommets. It consists of two parts. To do this, place the larger part of the die mold at the bottom of the press and load the fabric. Screw the second part into the upper part of the press. The diameter of the lower part to be inserted into the press is 18.9 mm...
11.12€
9.27€
Availability: In Stock
Product code: SK_790413
Die Mold is used to punch holes for grommets. It consists of two parts. To do this, place the larger part of the die mold at the bottom of the press and load the fabric. Screw the second part into the upper part of the press. The diameter of the lower part to be inserted into the press is 18.9 mm...
11.12€
9.27€
Availability: In Stock
Product code: SK_790413
Die Mold is used to punch holes for grommets. It consists of two parts. To do this, place the larger part of the die mold at the bottom of the press and load the fabric. Screw the second part into the upper part of the press. The diameter of the lower part to be inserted into the press is 18.9 mm...
11.12€
9.27€
Availability: In Stock
Product code: SK_790413
Die Mold is used to punch holes for grommets. It consists of two parts. To do this, place the larger part of the die mold at the bottom of the press and load the fabric. Screw the second part into the upper part of the press. The diameter of the lower part to be inserted into the press is 18.9 mm...
22.25€
18.54€
Availability: In Stock
Product code: SK_790413
Die Mold is used to punch holes for grommets. It consists of two parts. To do this, place the larger part of the die mold at the bottom of the press and load the fabric. Screw the second part into the upper part of the press. The diameter of the lower part to be inserted into the press is 18.9 mm...
22.25€
18.54€
Availability: In Stock
Product code: SK_790413
Die Mold is used to punch holes for grommets. It consists of two parts. To do this, place the larger part of the die mold at the bottom of the press and load the fabric. Screw the second part into the upper part of the press. The diameter of the lower part to be inserted into the press is 18.9 mm...
22.25€
18.54€
Availability: In Stock
Product code: SK_790413
Die Mold is used to punch holes for grommets. It consists of two parts. To do this, place the larger part of the die mold at the bottom of the press and load the fabric. Screw the second part into the upper part of the press. The diameter of the lower part to be inserted into the press is 18.9 mm...
22.25€
18.54€
Availability: In Stock
Product code: SK_070998
Rivet Press Die forms an integral part of the press. Intended for rivets Ø10 mmPress consists of two parts. The bigger part into which is inserted the rivet, place at the bottom of the press. The second part need to be screwed into the press and insert the appropriate components for riveting. Suitab..
10.38€
8.65€
Availability: In Stock
Product code: SK_070998
Rivet Press Die forms an integral part of the press. Intended for rivets Ø10 mmPress consists of two parts. The bigger part into which is inserted the rivet, place at the bottom of the press. The second part need to be screwed into the press and insert the appropriate components for riveting. Suitab..
20.76€
17.30€
Availability: In Stock
Product code: SK_790331
Die Mold is an integral part of the press. With its help we rivet rivets Ø5 mm. Mold has two parts. The larger part into which the rivet is inserted is placed in the lower part of the press. Screw the second part into the press and insert a suitable component for riveting. You will also need pres..
13.33€
11.11€
Availability: In Stock
Product code: SK_790331
Die Mold is an integral part of the press. With its help we rivet rivets Ø5 mm. Mold has two parts. The larger part into which the rivet is inserted is placed in the lower part of the press. Screw the second part into the press and insert a suitable component for riveting. You will also need pres..
26.66€
22.22€
Availability: In Stock
Product code: SK_790046
Use this die mold to rivet the magnetic snaps . It consists of 4 parts, which are screwed into the press, depending on which part of the rivet you are riveting.
The diameter of the lower part that is inserted into the press is 18.9 mm...
18.40€
15.33€
Availability: In Stock
Product code: SK_890167
The metal die mold is intended for riveting of matt grommets Ø10 mm (with wider margin) . It consists of two parts. It is used by placing the larger part of the die mold in the lower part of the press and inserting the fabric with the grommet. We screw the second part into the upper part of the pres..
14.72€
12.27€
Availability: In Stock
Product code: SK_890167
The metal die mold is intended for riveting of matt grommets Ø10 mm (with wider margin) . It consists of two parts. It is used by placing the larger part of the die mold in the lower part of the press and inserting the fabric with the grommet. We screw the second part into the upper part of the pres..
29.45€
24.54€
Availability: In Stock
Product code: SK_890169
The metal dies mould is intended for riveting of matte grommets Ø16 mm and consists of two parts. It is used in such a way that the larger part of the mould is placed in the lower part of the press and the material with the grommet is inserted. The other part is screwed into the upper part of the pr..
14.72€
12.27€
Availability: In Stock
Product code: SK_890169
The metal dies mould is intended for riveting of matte grommets Ø16 mm and consists of two parts. It is used in such a way that the larger part of the mould is placed in the lower part of the press and the material with the grommet is inserted. The other part is screwed into the upper part of the pr..
29.45€
24.54€
Availability: In Stock
Product code: SK_790412
Die Mold is used for riveting press studs found under code 780845, 780843, 840489 and 780844.
Die Molds vary on the press depending on which part of the buttons you want to attach. The diameter of the bottom to be inserted in the press is 18.9 mm ...
16.23€
13.52€
Availability: In Stock
Product code: SK_790412
Die Mold is used for riveting press studs found under code 780845, 780843, 840489 and 780844.
Die Molds vary on the press depending on which part of the buttons you want to attach. The diameter of the bottom to be inserted in the press is 18.9 mm ...
16.23€
13.52€
Availability: In Stock
Product code: SK_790412
Die Mold is used for riveting press studs found under code 780845, 780843, 840489 and 780844.
Die Molds vary on the press depending on which part of the buttons you want to attach. The diameter of the bottom to be inserted in the press is 18.9 mm ...
16.23€
13.52€
Availability: In Stock
Product code: SK_790412
Die Mold is used for riveting press studs found under code 780845, 780843, 840489 and 780844.
Die Molds vary on the press depending on which part of the buttons you want to attach. The diameter of the bottom to be inserted in the press is 18.9 mm ...
48.69€
40.57€
Availability: In Stock
Product code: SK_790412
Die Mold is used for riveting press studs found under code 780845, 780843, 840489 and 780844.
Die Molds vary on the press depending on which part of the buttons you want to attach. The diameter of the bottom to be inserted in the press is 18.9 mm ...
48.69€
40.57€